Planar Home Theater Drivers and Software

FirmwareDetails
PC8130/PD8150 Firmware Update

Release MP18, 06/01/2011

 

  • Corrected the ability to adjust for crushing black and clipping whites for digital component video signals.
  • Corrected cadence reconstruction for 60Hz sources when the projector is set to 48Hz.
  • Fixed aspect ratio issues during PIP functions.
  • Corrected some RS232 command functions
  • Improved ability to automatically detect appropriate color space.
  • Numerous cosmetic improvements to the OSD.
  • Numerous compatibility improvements for analog sources.
  • 4/22/09-4/27/09 Updated Firmware Install Instructions.
PD7170 Firmware Update Release MP02-GP16, 9/17/2008

PD7010 Firmware Update

MPR2_DPP07_MD04, 05/20/2008

  • HDMI/DVI register change (HDCP compatibility improvement)

MPR3_DPP06b_MD04 12/19/2007

  • HDMI register change (HDCP compatibility improvement)
  • High altitude fan speed setting added to Service Menu

MPR3_DPP05_MD04 04/13/2007

  • Added Deinterlacer function in Display menu
  • Added Video level function in Display menu
  • Changed sharpness setting default to “0” for DVI source with 720p
  • Corrected memory recall, which wasn’t recalling properly for some functions
  • Increased switching speed for source changes
  • Removed buffering of source select key presses
  • Locked white peaking value at “10”
  • Changed brightness default to “75” and contrast default to “47” for HDMI input
  • Disabled tint and saturation for DVI & HDMI sources
  • Fixed color space control for DVI source
  • Corrected Auto Source not locking on HDMI source MPR3_DPP04_MD04 1/5/2007
  • Modified Source Enable menu to reduce problems associated with false detection of SCART signals.
  • Auto color space has been changed from REC709 to REC601 for 480i, 480p, 576i, 576p.
  • Added additional range to the DVI contrast control.
  • Fixed REC601 spelling error in the menu.
  • Corrected Letterbox aspect ratio.
  • Enabled phase adjustment for component video sources.
  • Removed the “No Source Found” message since this indicates that the projector has stopped searching even though it has not.
  • Fixed issue where DVI would not lock when Auto-source enabled.
  • Fixed issue where HDMI and DVI brightness would change when the color space was changed.
  • Fixed automatic detection of color space with HDMI sources.
  • Modified test pattern mode so that overscan, aspect ratio, video type, and source selection are disabled.
  • Fixed issue where factory reset would only reset the settings for the current source.
  • Changed test pattern resolution to the full DMD size of 1280x768

PD7060 Firmware Update

MPR2_DPP07_MD04 05/20/2008

  • HDMI/DVI register change (HDCP compatibility improvement)

MPR3_DPP06b_MD04 12/19/2007

  • HDMI register change (HDCP compatibility improvement)
  • High altitude fan speed setting added to Service Menu

MPR3_DPP05_MD04 4/13/2007

  • Added Deinterlacer function in Display menu
  • Added Video level function in Display menu
  • Changed sharpness setting default to “0” for DVI source with 720p
  • Corrected memory recall, which wasn’t recalling properly for some functions
  • Increased switching speed for source changes
  • Removed buffering of source select key presses
  • Locked white peaking value at “10”
  • Changed brightness default to “75” and contrast default to “47” for HDMI input
  • Disabled tint and saturation for DVI & HDMI sources
  • Fixed color space control for DVI source
  • Corrected Auto Source not locking on HDMI source MPR3_DPP04_MD04 1/5/2007
  • Modified Source Enable menu to reduce problems associated with false detection of SCART signals.
  • Auto color space has been changed from REC709 to REC601 for 480i, 480p, 576i, 576p.
  • Added additional range to the DVI contrast control.
  • Fixed REC601 spelling error in the menu.
  • Corrected Letterbox aspect ratio.
  • Enabled phase adjustment for component video sources.
  • Removed the “No Source Found” message since this indicates that the projector has stopped searching even though it has not.
  • Fixed issue where DVI would not lock when Auto-source enabled.
  • Fixed issue where HDMI and DVI brightness would change when the color space was changed.
  • Fixed automatic detection of color space with HDMI sources.
  • Modified test pattern mode so that overscan, aspect ratio, video type, and source selection are disabled.
  • Fixed issue where factory reset would only reset the settings for the current source.
  • Changed test pattern resolution to the full DMD size of 1280x768

PD370 Firmware Update

Release 1.3, 02/20/2008

PD420 Firmware Update

Release 1.3, 02/20/2008

PD470 Firmware Update

Release 1.3, 02/20/2008

For Runco product documentation, see www.runco.com.